Patio & Balcony Water-Repellent Sealer

No. It penetrates the pores and leaves no surface film, so it feels the same underfoot.

No gloss and essentially no color change; a few dark or very absorbent stones may deepen slightly, so test a corner.

Clean thoroughly and let dry 24 to 48 hours. Sealing a dirty surface locks the stains in.

On absorbent patio pavers, concrete, sandstone, and brick, yes: rain and stains have a harder time soaking in, the surface dries faster, moss and black spots cling less, and cleaning gets easier. Polished stone and glazed tile don't absorb water, so it won't help there and isn't meant for them. Apply when the surface is clean, fully dry, and no rain is due; it cures in 24 hours.

Typically 2 to 3 years outdoors, less under heavy traffic or exposure; reapply when water stops beading.

No. They’re too dense for it to penetrate and it can leave marks on the surface.

It slows them. The surface stays wet for less time so growth slows noticeably, though shady spots still need periodic cleaning.

Sprinkle some water: if it no longer beads and soaks in within minutes, reapply. Outdoors, check every year or two—high-traffic spots wear sooner.

It helps—treated pavers absorb slowly, so drips from pots wipe away more easily. Clean existing rings and let the surface dry before applying.

Wipe it off with a damp cloth while wet—once dry, it leaves a repellent film that’s hard to remove. Masking the glass and railing bases before you start is easiest.

This is a silane-siloxane repellent that soaks into the pores of brick and stone so the surface stops absorbing water and stains, without forming a film; it doesn't change the look, stays breathable, and won't peel. A membrane is a continuous layer brushed on top that holds back water under pressure, which is what a waterproofing layer needs. Use a repellent against absorption, staining, and moss; use a membrane to stop leaks.

No. It stops the surface from soaking up water, but it can't seal cracks, open joints, or a failed waterproofing layer. If water reaches the floor below, find the leak and repair the cracks or the membrane first; once it's fixed, cleaned, and dry, apply the repellent for surface protection.

Three things: DIY retail or contractors and property managers, sizes (500 mL, 1 L, 5 L), and whether to sell it with a stone cleaner as a clean-then-protect system. The pitch is no color change, no slip, breathable.

Free samples are usually ready in 3–5 days. Standard MOQ is 500 bottles, and bulk orders are scheduled after packaging and labels are approved.

All of it: formula direction, scent, fill size (500 mL spray, 1 L refill, and more), mist or foam trigger, label design and language, and ecommerce bundles with the stone cleaner.

Yes, we ship samples first. Test them on cleaned paver and sandstone samples like the ones your customers handle, and record water uptake reduction, beading, and color change. That tells you more than a before-and-after photo.

We provide SDS/MSDS, a TDS, and batch COAs, plus bilingual label content for your target market. They aren’t posted publicly; we send them per project on inquiry.

Pricing is tiered by packaging, trigger or cap, label, and order quantity, starting at the 500-bottle MOQ. Send your target quantity, fill size, and packaging needs, and we’ll quote unit prices by volume tier with sample and lead-time details.