Dilution & dosing

Check that auto-dosing is turned on in the app, the solution tank is fully seated, and the outlet and line aren't clogged. Some docks only work with the brand's own cartridge, so after switching to another solution you may need to add it to the clean water tank by hand.

Oct 9, 2026

The difference is how each mop gets rinsed. A roller mop rinses its roller with clean water as it goes and uses more water, so its dirty water channel is more foam-sensitive. Spinning pads rely on dock washes and carry dirty water between them, so residue and wash intervals matter more. Both take a low-foam solution at the label ratio.

Oct 5, 2026

Over radiant heat, dose at the low end, lower the water level, mop when the floor is cooler and use mixed solution the same day. A warm floor makes water evaporate fast, so solution concentrates on the floor before the pad can carry it off, leaving streaks. Wood floors also suffer from repeated wet-dry cycles.

Oct 5, 2026

Put active content, recommended dilution, packaging specs, testing and MOQ into one table, then convert each quote to cost per mopping run. Comparing only unit price makes it easy to pick a formula that needs double the dose, fails on foam or residue, and ends up costing more.

Oct 5, 2026

In markets with lots of auto-dosing docks and repeat buyers, start with a concentrate and validate it in the leading models' dosing compartments; for channels full of first-time users who want to open and pour, consider ready-to-use. Choose by channel and target machines, because the three formats differ in formula strength, packaging and testing.

Oct 4, 2026

Low-priced solutions often cut costs by cutting active ingredients, so you add more and mop more, and the bottle runs out faster. Work out cost per run as bottle price divided by real uses, then look at how clean the floors get and how it treats the machine. That's what shows the true value.

Oct 3, 2026

Usually, yes. Dilute it at the label ratio and use it with a flat mop or spin mop. A low-foam, low-residue formula needs no rinse afterward and won't leave floors tacky. The reverse isn't always true: regular floor cleaners are often high-foam or waxy and may not belong in a robot.

Oct 3, 2026

Using a third-party solution doesn't automatically void the warranty: most terms exclude damage caused by misuse, not every non-brand liquid. Check your robot's warranty terms, use a low-foam solution labeled for robot mops, add it where the manual says at the label ratio, and keep your receipt. That makes it much easier to show what happened if something goes wrong.

Oct 3, 2026

Two to three times a week is enough for most homes. Mop daily where pets hang out, where a baby crawls, or in a greasy kitchen or busy entry. The more often you mop, the less solution you should add each time, sometimes just water, so residue doesn't build up day after day.

Oct 3, 2026

When humidity is high, set the water to its lowest level or switch to vacuum-only. Run a dehumidifier or the AC first, and mop once the floor stops sweating. Dose solution at the low end, and dry the pads, dirty tank and wash tray after every run so nothing turns moldy or smelly.

Oct 2, 2026

Take the compartment out and empty it, soak and rinse it in warm water around 40°C (104°F), clear crystals from the opening and outlet, wipe the contacts and sensor window, and let it dry fully before reinstalling. Clean it every month or two, and always before switching to a different solution.

Oct 2, 2026

Yes, for some jobs. Plain water handles everyday dust and light water marks. Greasy footprints, kitchen floors, paw prints and drool marks only fade with water; a small dose of low-foam robot mop cleaning solution gets them clean. When you do add solution, less is better than more.

Oct 1, 2026

Maintain a robot vacuum in three layers: after every run, empty the dirty water tank and let it air-dry; every week, scrub the dock's wash tray, filter and mop pads and rinse the clean tank; every month, wipe sensors and contacts and check outlets and auto-dosing. Replace consumables per your manual.

Oct 1, 2026

Per run, concentrated robot mop solution usually costs less: each fill takes only a dozen or so milliliters, so one bottle lasts dozens to about a hundred runs, and it suits auto-dosing. Ready-to-use needs no measuring and suits homes that mop occasionally. Compare cost per run, not bottle price.

Sep 29, 2026

For your first robot mop run, let it map your home with a vacuum-only pass, add solution to the clean tank or dosing compartment the manual specifies, set the water flow to medium and dampen the pads first. Afterward, check for streaks, missed spots and puddles, then fine-tune for your floors.

Sep 29, 2026

When auto-dosing stops dispensing, the usual causes are solution that's too thick or has dried at the outlet, a clogged compartment outlet, mixed products, or a liquid that isn't made for auto-dosing. Confirm the feature is on, flush the compartment and lines as the manual describes, then use a solution labeled for auto-dosing.

Sep 29, 2026

Work out the dose from the label ratio and your tank size, and err low. For CleenU Robot Vacuum Cleaning Solution, the ratio is about 1:50 to 1:100, and 10 to 20 mL per fill is usually enough. On very dirty floors, run a second pass instead of doubling up. Extra solution means foam and residue.

Sep 28, 2026

Cleaning solution goes in the clean water tank. On docks with automatic dosing, it goes undiluted in the dock's detergent compartment, and the dock mixes it in for you. The dirty tank only collects wastewater, so never add solution there. Your robot's manual has the final word.

Sep 28, 2026

Plain water is enough for light dust. For greasy footprints, kitchen spatter, paw prints and pet drool, add a low-foam robot mop cleaning solution. It goes in the clean water tank or the dock's auto-dosing compartment, never the dirty tank, at the label dose. When in doubt, use less.

Sep 28, 2026